CyrusDB API¶

The interface¶

The bulk, especially the beginning, of this document is from an email Bron sent to the cyrus-devel mailing list on 27 February 2018 05:50:39GMT.

The cyrusdb interface is a common API for accessing key-value datastores from within cyrus code. It's part of the libcyrus shared object (but not libcyrus_min), used by all cyrus binaries. The use of the cyrusdb API abstracts the details of the underlying data store, allowing sites to use different database types depending on their needs, and allowing Cyrus developers to use a common API for data storage needs.

The entire cyrusdb source lives in the lib/ directory of the cyrus-imapd repository, in the following files:

lib/cyrusdb.h
lib/cyrusdb.c
lib/cyrusdb_flat.c
lib/cyrusdb_quotalegacy.c
lib/cyrusdb_skiplist.c
lib/cyrusdb_sql.c
lib/cyrusdb_twoskip.c

cyrusdb.h¶

interface definitions (all access to cyrusdb databases happens through the functions defined here)
the struct cyrusdb_backend data structure which defines the interface implemented by each backend.
constants for flags to the cyrusdb_open call, and return codes. Cyrusdb functions all return their own CYRUSDB_* error codes, which are not compatible with the r = IMAP_* return codes used throughout much of the rest of the codebase.

cyrusdb.c¶

implementations of the wrapper functions around the backends, including default implementations of some functions which are common to many backends but overridden by some.
a wrapper to initialise and cleanup the state of each backend (if needed) during Cyrus set up / tear down.

cyrusdb_*.c¶

the actual implementations of each backend! We'll look at some in a sec.

Configuration¶

The name of the backend for each of the main internal databases can be configured in imapd.conf, for example: annotation_db: skiplist. This is then read in imap/global.h and imap/global.c during startup, so that the global variable config_annotation_db gets set to the configured backend name:

config_annotation_db = config_getstring(IMAPOPT_ANNOTATION_DB);

(Beware the misleading naming here: config_annotation_db is a string describing the backend used by the database, not, say, its location on disk.)

Internally, the main module for each database sets up struct of pointers to the cyrusdb functions it implements, which is registered in lib/cyrusdb.c

lib/cyrusdb.c provides backend-agnostic wrapper functions for interacting with cyrusdb databases.

A full example¶

struct db *db = NULL;
struct txn *tid = NULL;
const char *filename = NULL;
int flags = CYRUSDB_CREATE;

cyrus_init(alt_config, "toolname", 0);

filename = config_getstring(IMAPOPT_ANNOTATION_DB_PATH);

r = cyrusdb_open(config_annotation_db, filename, flags, &db);

r = cyrusdb_fetch(db, key, keylen, &data, &datalen, &tid);

r = cyrusdb_commit(db, tid);

r = cyrusdb_close(db);

cyrus_done();

Note that you always open a database first, and close it at the end. You must always call cyrus_init() and cyrus_done() to properly initialize and clean up the cyrusdb environments.

This example also uses a transaction, meaning that the database is locked in exclusive mode between the 'fetch' (the first use of the transaction) and the commit.

Tools¶

There are also some tools to work with and support cyrus databases:

imap/ctl_cyrusdb¶

ctl_cyrusdb(8)

performs maintenance on the cyrusdb subsystem. This is called in two places:
- START: "ctl_cyrusdb -r" (recovery). This is the ONLY PLACE that code is guaranteed to be run at startup on every cyrus installation, so you'll find quite a lot of detritus has built up in this codepath over the years.
- EVENTS: "ctl_cyrusdb -c" (checkpoint). This is run regularly (period=180 at Fastmail, examples in the codebase have period=5 or period=30). Both this codepath and cyr_expire tend to run periodically on cyrus systems, and cleanup code is spread between those two locations.

imap/cvt_cyrusdb¶

cvt_cyrusdb(8)

used for converting a database between versions. This is often used to prepare for upgrade, particularly in the past when Cyrus supported berkeley DB which didn't upgrade cleanly across OS versions, it was common to use cvt_cyrusdb to turn databases into a very portable format (flat or skiplist) before upgrading, upgrade the OS, convert back to the fast format (berkeley) and then restart.

imap/cyr_dbtool¶

cyr_dbtool(8)

once known as brontool, this is the first piece of Cyrus code I ever wrote! It's a fairly dumb wrapper around the CyrusDB interface, and able to be used to read, write, or iterate any parts of a database. Its interactive mode is not special-character clean, but it can also be used in batch mode, which uses IMAP atom-string literal8 for input/output, and hence can roundtrip data reliably.

There are also tools like: ctl_conversationsdb(8), dav_reconstruct(1) and ctl_mboxlist(8) which can be used to manage individual databases through a more specific interface which understands the context as well as just the raw key/value.

How to use CyrusDB¶

Assuming that cyrus_init() has been called, which calls cyrusdb_init(), you can assume that databases will work in any Cyrus code.

The first step is to open a database. Databases have a filename - this might be a literal filename on the backend, a directly containing data, or an opaque token used by the backend to locate a datasource.

int flags = 0;
struct db *mydb = NULL;
int r = cyrusdb_open("skiplist", "/tmp/database.db", flags, &mydb);
if (!r) return mydb;  // if (r == CYRUSDB_OK) { ... }
/* XXX: error handling */

Accepted flags:

CYRUSDB_CREATE - if the named database doesn't exist, create a blank database.

CYRUSDB_MBOXSORT - use the abomination called improved_mboxlist_sort which re-orders a couple of characters to allow "foo.bar" to sort before "foo bar", for perfectly good reasons, but we're going to fix it a better way. Not every engine supports arbitrary collation, and if many engines corrupt horribly if the same database is opened with different choices for this flag. Ouch.

CYRUSDB_CONVERT - if set and the database fails to open, attempt a magic detection on the file content and try to convert the database to the requested backend type before opening it. In-place upgrades! If this is NOT set, then instead the magic detection will still be performed, but the open database will be returned using the correct engine for that database rather than converted. Magic detection only currently works for single-file database formats.

CYRUSDB_NOCOMPACT - if the database format supports automatic compacting, don't use it. Handy for when you want to read without causing any possible issues (e.g. read-only filesystem during recovery) or when performance is critical and you don't want to risk waiting while a recompact happens.

All the remaining functions take that "struct db" pointer.

There's also a cyrusdb_lockopen() interface which takes a transaction pointer and returns with the transaction already active. This isn't actually being used yet, but is intended to allow slightly more efficient single-operation database use. Right now, open returns an unlocked database, but may need to lock as part of the setup, so keeping that lock would avoid one extra unlock/lock cycle.

Reading, Writing, & Transactions¶

CyrusDB supports both transactional and non-transactional access. Transactions are always exclusive. This is arguably a deficiency in the interface, particularly since many engines implement a non-exclusive (read) lock internally anyway.

Reading¶

There are now 4 interfaces to read data. Two of which are original cyrusdb and two of which are more recently added.

original:

cyrusdb_fetch()
fetch a single value by exact key.

cyrusdb_foreach()
given a prefix, iterate over all the keys with that prefix (including exactly that key) in order.

newer:

cyrusdb_fetchnext()
given an exact key, fetch the following key and value (regardless of whether the key exists), e.g given keys "f" and "g", fetchnext "foo" would return "g", as would fetchnext "f". This can be used to implement foreach (indeed, the skips do exactly that).

cyrusdb_forone()
given an exact key, act like cyrusdb_foreach but only for that one key.

This is a convenience wrapper around fetch to allow doing things like:
r = cyrusdb_forone(mydb, "folder", 6, p, cb, rock, &tid);
if (!r) r = cyrusdb_foreach(mydb, "folder.", 7, p, cb, rock, &tid);
Which does precisely "folder" and its children without visiting any other keys that have "folder" as a prefix.

Since the cyrusdb interface always takes both a pointer and a length, it's also possible to use:

char *key = "folder.";
r = cyrusdb_forone(mydb, key, 6, p, cb, rock, &tid);
if (!r) r = cyrusdb_foreach(mydb, key, 7, p, cb, rock, &tid);

OK, foreach. Foreach is very tricky, because it takes TWO callbacks. The callbacks have an identical signature, but different return codes!

typedef int foreach_p(void *rock,
const char *key, size_t keylen,
const char *data, size_t datalen);

typedef int foreach_cb(void *rock,
const char *key, size_t keylen,
const char *data, size_t datalen);

The difference is this: foreach_p is called with the database locked, always - even if called without a transaction. foreach_p returns 1 or 0. 0 means "skip this record", 1 means "process this record". This is useful to pre-filter records when called without a transaction, because otherwise you lock and unlock all the time.

NULL for foreach_p is treated like a test which always returns '1', so you can pass NULL if you don't need filtering.

If foreach_p returns 1, then with an unlocked transaction, the database is now unlocked BEFORE calling foreach_cb, the callback. foreach_cb returns a CYRUSDB_ response. If zero, the foreach will continue. If non-zero, the foreach will abort and return the non-zero response. This is both useful for error cases, and useful for short-circuiting, if you only care that a key exists, you can do something like:

static int exists_cb(void rock attribute((unused)), [...])
{
    return CYRUSDB_DONE; /* one is enough */
}

and then use exists_cb as your foreach_cb and check if the return code is CYRUSDB_DONE to know if the foreach found a key.

If foreach is called with a transaction pointer, then it is your responsibility as the caller to also pass that pointer (and a pointer to the database) in that rock, so that callees can make further operations within the same transaction. A foreach with a transaction does NOT unlock before calling its callback.

About Transactions¶

You may have noticed that 'tid' at the end. Every function for acting on the database takes as its last argument a struct txn **.

The cyrusdb interface works in two modes - transactional and non-transactional. The value of the 'tid' parameter decides which mode is used. There are three possible values:

NULL - non-transactional request. Do whatever you need for internal locking, but starts with an unlocked database and ends with an unlocked database.

Note

At least skiplist and twoskip implement a hack where if the database IS locked for a non-transactional read request, they will act as if you'd passed the current transaction in for the NULL case. This is a hack around layering violations and kind of sucks.
&NULL - e.g:
```
struct txn *tid = NULL;
const char *data = NULL;
size_t datalen = 0;
int r = cyrusdb_fetch(mydb, key, keylen, &data, &datalen, &tid);
```
After calling this, tid will have an opaque value allocated by the database backend, which must be passed to all further cyrusdb operations on that database until either cyrusdb_commit() or cyrusdb_abort() are called.

&tid - e.g:

if (r == CYRUSDB_NOTFOUND) {
    r = cyrusdb_store(mydb, key, keylen, "DEFAULT", 7, &tid); // set a default value
}

Given an existing transaction, perform this call in the context of the transaction.

If you are currently in a transaction, you MUST pass the same transaction to every database call. It is not possible to mix or nest transactions.

There is one exception in the skiplist backend:

If you pass NULL to a fetch or foreach while the database is in a transaction, it will silently do the read in the current transaction rather than returning an error.

Writing¶

There are three write operations:

cyrusdb_create
cyrusdb_store
cyrusdb_delete

cyrusdb_store will either create or overwrite an existing key. cyrusdb_create will abort if the key already exists. cyrusdb_delete takes a flag 'force' which just makes it return CYRUSDB_OK (0) rather than CYRUSDB_NOTFOUND if the key doesn't exist. Strangely, 'force' is after &tid, making it the only cyrusdb API that does that, but hey - keeps you on your toes.

&tid behaves exactly the same for the write APIs. If not passed, then the database engine will behave as it if creates a writable transaction, does the operation, then commits all within the cyrusdb_* call.

Gotchas!¶

\0 is permitted in both keys and values, though 'flat' and 'quotalegacy' have 8-bit cleanliness issues.
zero-length keys are not supported
zero-length values are theoretically supported, but a little interesting. Certainly, pass "" rather than NULL as the value when writing or things will get weird. I'm pretty sure at least the *skip databases assert on these kinds of weirdness.
unlocked foreach: this is the land of the gotcha! They key and data pointers (const char *) passed to your foreach_cb are only valid UNTIL YOU TOUCH THE DATABASE. A common cause of rare and hard to diagnose bugs is writing something to the same database in the same process (OR EVEN READING FROM IT AGAIN). I cannot emphasise this enough. If you want to zero-copy access that data, you need to access it first, before touching that DB again. Otherwise the map in which the data was a pointer may have been replaced as the next read found a new file and mapped it in!

also: if you're implementing a backend. Unlocked foreach must find future records created by the current callback. Consider a database containing 4 keys:
```
A B C D
```
If you are at key B and insert a key BB, then it must be iterated over. If you insert AA while at B, it must NOT be iterated over.
Opening the same database multiple times. In the bad old days, opening the same database multiple times in the same process led to locking bugs (fcntl is braindead). Each database engine is responsible for making sure this doesn't happen. Most engines keep a linked lists of open databases. If you try to open the same database again, they will just return the existing opened copy and bump a refcount. Beware. If a database is locked and you try to lock again - thinking you were opening it brand new, it will assertion fail and/or error.

I think that covers about everything! Cyrusdb is used just about everywhere that sorted key-value databases give what's needed, including mailboxes.db, annotations.db (global and per mailbox databases), seen state (non-owner), subscriptions, cyrus.indexed.db for Xapian, and the rather massive (and increasingly inaccurately named) user.conversations.

Future plans are to increase the usage of cyrusdb databases, possibly by building an indexing layer on top and using that instead of the sqldb interface used for sqlite databases by DAV code, and possibly also moving other custom file formats into a cyrusdb to allow easier stateless server builds on a distributed backend.

API Reference¶

All functions follow the normal C API of returning '0' on success, and an error code on failure

cyrusdb_init(void)¶

Is called once per process. Don't call this yourself, use cyrus_init(). No other calls will be made until this is called.

cyrusdb_done(void)¶

The opposite of cyrusdb_init() - called once per process to do any cleaning up after all database usage is finished. Don't call this yourself, use cyrus_done().

cyrusdb_sync(const char *backend)¶

Perform a checkpoint of the database environment. Used by berkeley backend. Is called by ctl_cyrusdb -c on a regular basis

cyrusdb_open(const char backend, const char fname, int flags, struct db **retdb)¶

Opens the database with the specified 'file name' (or other descriptor, for example the sql backend is not a filename), and if successful returns an opaque database structure

Flags:

CYRUSDB_CREATE - create the database if it doesn't exist
CYRUSDB_MBOXSORT - sort '.' first, so folder listing is correct

Errors:

CYRUSDB_IOERROR - if there is any error reading the file, or any corruption detected while loading the file

cyrusdb_close(struct db *db)¶

Close the named database. Will release any locks if they are still held, but it's bad practice to close without committing or aborting, so the backend should log an error

Errors:

CYRUSDB_IOERROR - if there are any errors during close

cyrusdb_fetch(struct db db, const char key, size_t keylen, const char **data, size_t *datalen, struct txn **tidptr)¶

cyrusdb_fetchlock(struct db db, const char key, size_t keylen, const char **data, size_t *datalen, struct txn **tidptr)¶

Fetch the value for the exact key given by key and keylen. If data is not NULL, set datalen and return a valid pointer to the start of the value.

Fetchlock is identical to fetch, but gives a hint to the database that the record is likely to be modified soon.

NOTE: it is possible to store a key with a zero length data record, in which case *datalen will be set to zero, and *data will be set to a non-NULL value

It is an error to call fetch with a NULL key or a zero keylen

It is an error to call fetch with a NULL datalen and a non-NULL data, however it is acceptable to call with a NULL data and a non-NULL datalen if you are only interested in the length

Errors:

CYRUSDB_IOERROR - if any error occurs reading from the database
CYRUSDB_LOCKED - if tidptr is incorrect
CYRUSDB_NOTFOUND - if there is no record that matches the key

cyrusdb_foreach(struct db db, const char prefix, size_t prefixlen, foreach_p goodp, foreach_p procp, void *rock, struct txn **tidptr)¶

cyrusdb_forone(struct db db, const char key, size_t keylen, foreach_p goodp, foreach_p procp, void *rock, struct txn **tidptr)¶

cyrusdb_foreach() iterates over all records matching the given prefix, in database order (which may be MBOXLIST sort, depending on the parameters given to open

It is legal to give a NULL pointer as prefix if prefixlen is zero, in which case it will return all records in the database. It is an error to give a non-zero prefixlen with a NULL prefix.

cyrusdb_forone() "iterates" over the single record matched by the given key. If you've already built callbacks for processing each record from a foreach, this lets you use the same interface to process a single record.

goodp - this function is only used for deciding if the record needs to be further processed. It can be used for basic filtering, and returns true (non-zero) to process, or zero to skip and move straight to the next record. Because goodp can't make any database changes, it doesn't break the lock, so it's faster to use goodp to filter records if you don't need to process all of them. NULL is a legal value for goodp, and means that all records will be processed.

procp - procp is the main callback function. If you use foreach in non-transactional mode, the database is unlocked before calling procp, and locked again afterwards. You are allowed to add, delete or modify values in the same database from within procp. If procp returns non-zero, the foreach loop breaks at this point, and the return value of the foreach becomes the return value of procp. If procp returns zero, the foreach loop will continue at the NEXT record by sort order, regardless of whether the current record has changed or been removed. procp MUST NOT be NULL.

Errors:

procp_result - whatever your callback returns
CYRUSDB_IOERROR - if any error occurs while reading
CYRUSDB_LOCKED - if tidptr is incorrect

cyrusdb_create(struct db db, const char key, size_t keylen, const char *data, size_t datalen, struct txn **tidptr)¶

cyrusdb_store(struct db db, const char key, size_t keylen, const char *data, size_t datalen, struct txn **tidptr)¶

Create a new record or replace an existing one. The only difference between these two is that cyrusdb_create will return an error if the record already exists, while cyrusdb_store will replace it

If tidptr is NULL, create/store will take a write lock for the duration of the action.

Any failure during create/store will abort the current transaction as well as returning an error

It is legal to pass NULL for the data field ONLY if datalen is zero. It is not legal to pass NULL for key or zero for keylen

Errors:

CYRUSDB_IOERROR - any error to write to the database
CYRUSDB_LOCKED - if tidptr is incorrect
CYRUSDB_EXISTS - if cyrusdb_create is called on an existing key
CYRUSDB_AGAIN - if a deadlock is created. The current transaction has been aborted, but a retry may succeed

cyrusdb_delete(struct db db, const char key, size_t keylen, struct txn **tidptr, int force)¶

Delete the given record from the database. If force is true, then succeed even if the record doesn't currently exist.

It is not legal to pass NULL for key or zero for keylen

Errors:

CYRUSDB_IOERROR - any error to write to the database
CYRUSDB_LOCKED - if tidptr is incorrect
CYRUSDB_NOTFOUND - if force is not set and the key doesn't exist
CYRUSDB_AGAIN - if a deadlock is created. The current transaction has been aborted, but a retry may succeed

cyrusdb_commit(struct db db, struct txn tid)¶

Commit the current transaction. tid will not be valid after this call, regardless of success

If the commit fails, it will attempt to abort the transaction

Errors:

CYRUSDB_IOERROR - any error to write to the database
CYRUSDB_LOCKED - if tidptr is incorrect
CYRUSDB_AGAIN - if a deadlock is created. The current transaction has been aborted, but a retry may succeed

cyrusdb_abort(struct db db, struct txn tid)¶

Abort the current transaction. tid will not be valid after this call, regardless of success

Attempt to roll back all changes made in the current transaction.

Errors:

CYRUSDB_IOERROR - any error to write to the database
CYRUSDB_LOCKED - if tidptr is incorrect

cyrusdb_dump(struct db *db, int detail)¶

Optional function to dump the internal structure of the database to stdout for debugging purposes. Don't use.

cyrusdb_consistent(struct db *db)¶

Check if the DB is internally consistent. Looks pretty bogus, and isn't used anywhere. Don't use.

Cyrus IMAP

CyrusDB API¶

The interface¶

cyrusdb.h¶

cyrusdb.c¶

cyrusdb_*.c¶

Configuration¶

A full example¶

Tools¶

imap/ctl_cyrusdb¶

imap/cvt_cyrusdb¶

imap/cyr_dbtool¶

How to use CyrusDB¶

Reading, Writing, & Transactions¶

Reading¶

About Transactions¶

Writing¶

Gotchas!¶

API Reference¶

cyrusdb_init(void)¶

cyrusdb_done(void)¶

cyrusdb_sync(const char *backend)¶

cyrusdb_open(const char *backend, const char *fname, int flags, struct db **retdb)¶

cyrusdb_close(struct db *db)¶

cyrusdb_fetch(struct db *db, const char *key, size_t keylen, const char **data, size_t *datalen, struct txn **tidptr)¶

cyrusdb_fetchlock(struct db *db, const char *key, size_t keylen, const char **data, size_t *datalen, struct txn **tidptr)¶

cyrusdb_foreach(struct db *db, const char *prefix, size_t prefixlen, foreach_p *goodp, foreach_p *procp, void *rock, struct txn **tidptr)¶

cyrusdb_forone(struct db *db, const char *key, size_t keylen, foreach_p *goodp, foreach_p *procp, void *rock, struct txn **tidptr)¶

cyrusdb_create(struct db *db, const char *key, size_t keylen, const char *data, size_t datalen, struct txn **tidptr)¶

cyrusdb_store(struct db *db, const char *key, size_t keylen, const char *data, size_t datalen, struct txn **tidptr)¶

cyrusdb_delete(struct db *db, const char *key, size_t keylen, struct txn **tidptr, int force)¶

cyrusdb_commit(struct db *db, struct txn *tid)¶

cyrusdb_abort(struct db *db, struct txn *tid)¶

cyrusdb_dump(struct db *db, int detail)¶

cyrusdb_consistent(struct db *db)¶

cyrusdb_open(const char backend, const char fname, int flags, struct db **retdb)¶

cyrusdb_fetch(struct db db, const char key, size_t keylen, const char **data, size_t *datalen, struct txn **tidptr)¶

cyrusdb_fetchlock(struct db db, const char key, size_t keylen, const char **data, size_t *datalen, struct txn **tidptr)¶

cyrusdb_foreach(struct db db, const char prefix, size_t prefixlen, foreach_p goodp, foreach_p procp, void *rock, struct txn **tidptr)¶

cyrusdb_forone(struct db db, const char key, size_t keylen, foreach_p goodp, foreach_p procp, void *rock, struct txn **tidptr)¶

cyrusdb_create(struct db db, const char key, size_t keylen, const char *data, size_t datalen, struct txn **tidptr)¶

cyrusdb_store(struct db db, const char key, size_t keylen, const char *data, size_t datalen, struct txn **tidptr)¶

cyrusdb_delete(struct db db, const char key, size_t keylen, struct txn **tidptr, int force)¶

cyrusdb_commit(struct db db, struct txn tid)¶

cyrusdb_abort(struct db db, struct txn tid)¶